English English  |
| Quantity: | |
|---|---|
INTRODUCTION
Super brightness and excellent ductility of coating.
The bath has good throwing power and levelling performance.
Pinhole free and excellent corrosion resistance.
Good stability, clear and bright coating surface, remove ‘fogs’.
Easy to control, high impurity tolerance, long service life and low maintenance cost.
It is suitable for the automobile industry (such as aluminum wheel), plastic, general workpieces.
EQUIPMENT
Tank: polyethylene lined steel, other types of plastic lined steel or plastic.
Cooling system: required, the consumption of brightener will decrease and the brightness of LCD areas will decrease that occurs at high temperature of the bath.
Filtration: the suspend solids such as dust and grease in solution will cause rough coating, pinhole or reduce brightness; continuous filtration is strongly recommended, and the filter pump should be able to filter the plating solution at least four times every hour.
ROLE OF ADDITIVES AND REPLENISHMENT
Make-up 510C: ‘treeing’ at both HCD and MCD areas may result from lack of the make-up 510C; ‘fogs’ at LCD areas may result from excessive make-up 510C.
Brightener 510A: the coating levelling in the whole current density area decreases when low content of 510A. And poor levelling or ‘step’ occur at LCD areas is caused by an excess of 510A.
Brightener 510B: when 510B content is insufficient, the coating is easy to burn; and excessive 510B causes ‘fogs’ in LCD areas.
Chloride ion: A dense, bright and smooth coatings could be plated by the right amount of chloride ion. A low content of chloride ion leads to ‘treeing’ at HCD and MCD areas, as well as ‘fogs’ at LCD ares; a high chloride ion content, the brightness and levelling of the coating will be significantly reduced, the anode surface shows a grayish white film and causes passivation.
CONSUMPTION OF ADDITIVES
Make-up 510C: 30-40 ml/1,000A.H
Brightener 510A: 60-80 ml/1,000 A.H
Brightener 510B: 30-40 ml/ 1,000A.H
SAFETY AND ENVIRONMENTAL
A Material Safety Data Sheet (MSDS) includes product safety instructions and environmental protection instructions. Read and review the MSDS for appropriate health and safety warning before use.
WARRANTY
1. We provide guarantee for product quality under the valid law.
2. The quality of the product after reprocessing or repackaging by customer is not included in the guarantee.
3. Please feel free to contact us if you have any questions or issues about the products, we are ready to answer at any time.
COLOR & PACKAGING
Make-up 510C is a green liquid with plastic barrel packaging. The packaging specification is 25 kg/pcs.
Brightener 510A is a black with red liquid, with plastic barrel packaging. The packaging specification is 25 kg/pcs.
Brightener 510B is a green liquid with plastic barrel packaging. The packaging specification is 25 kg/pcs.
?IMPORTANT NOTICE REGARDING THIS INSTRUCTION BOOK
The product information and recommendations contained in this document are based on our experimental theory and data. Due to the particularity of the surface processing, further as the actual use of our products by others is beyond our control, NO GUARANTEE of any kind is made as to the effects of such use, and NO RESPONSIBLE for any consequences. Also, all the information in this document cannot be used as evidence of copyright infringement.